Find Polyurethane Adhesive, Powder Adhesive Applicator, Hot Melt Adhesive Powder on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Features: use for EPE pearl cotton adhesive, this product is environmentally friendly non-toxic, high viscosity, fast curing, easy operation, continuous use of features not charring and not easy to turn yellow and other phenomena.
Model No.: TK-E701H
Appearance: white grain
Main ingredients: synthetic resin
Solid content: 100%
Toxicity: non-toxic
Open time: About 8-25 seconds
Softening point: 80 °C ± 10
Melt viscosity: 8000 ~ 15000 mpa.s/160 °C
Recommended use: temperature 130 ~ 180 °C
Instructions for use:
The hot melt adhesive is heated to the temperature, spray gun or coated on the adherend adhesive and stereotypes, must complete the work at the time of opening glue, clamping the adherends cooling to room temperature.
Hot melt adhesive glue pot storage should be appropriate, no repeated melting hot melt adhesive, long time repeated heating and melting hot melt adhesive will speed up the aging of hot melt adhesive.
Due to the use of the material, environment, different seasons, the temperature and the open time adjustment.
The above data for the laboratory test data, for customers to use when the conditions are not necessarily the same and is for reference only, please according to the specific use of selected compounds.
Matters needing attention:
1, the use of places should be good ventilation, away from the fire.
2, avoid the melted material contact with eyes, skin.
3, if the molten materials come into contact with the skin, immediately the injured skin immersed in water or cold water wash, etc. after cooling off stick to silicone rub swellings, hospitalized.
Packaging and transportation:
Carton or fiber bag, non dangerous goods, according to the transport general chemical products.
Storage conditions:
Ventilated, dry, cool place.
Cleaning equipment:
The equipment manufacturer cleaning equipment, or with mineral oil or paraffin cleaning equipment in 150 °C, then rinse with hot melt adhesive, glue temperature should not exceed 160 °C.
Product Categories : Cosmetics Series > Polyurethane Adhesive
